Commit locale changes from ports/analog BUSIO updates

Signed-off-by: Brandon-Hurst <[email protected]>

Author: Brandon-Hurst

locale/circuitpython.pot

@@ -28,25 +28,6 @@ msgid ""
 "Code stopped by auto-reload. Reloading soon.\n"
 msgstr ""
 
-#: ports/analog/common-hal/busio/UART.c
-#, c-format
-msgid ""
-"\n"
-"ERR: Error starting transaction: %d\n"
-msgstr ""
-
-#: ports/analog/common-hal/busio/UART.c
-msgid ""
-"\n"
-"ERR: Requested bus is busy\n"
-msgstr ""
-
-#: ports/analog/common-hal/busio/UART.c
-msgid ""
-"\n"
-"ERR: Uart transaction timed out.\n"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -149,6 +130,7 @@ msgstr ""
 msgid "%q indices must be integers, not %s"
 msgstr ""
 
+#: ports/analog/common-hal/busio/SPI.c ports/analog/common-hal/busio/UART.c
 #: shared-module/bitbangio/SPI.c
 msgid "%q init failed"
 msgstr ""
@@ -177,7 +159,7 @@ msgstr ""
 msgid "%q length must be >= %d"
 msgstr ""
 
-#: py/modsys.c py/runtime.c
+#: py/runtime.c
 msgid "%q moved from %q to %q"
 msgstr ""
 
@@ -521,7 +503,8 @@ msgstr ""
 msgid "All SPI peripherals are in use"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/UART.c ports/nordic/common-hal/busio/UART.c
+#: ports/analog/common-hal/busio/UART.c ports/espressif/common-hal/busio/UART.c
+#: ports/nordic/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr ""
 
@@ -651,10 +634,6 @@ msgid ""
 "disable.\n"
 msgstr ""
 
-#: ports/analog/common-hal/busio/UART.c
-msgid "Baudrate invalid. Must be a standard UART baudrate.\n"
-msgstr ""
-
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "Baudrate not supported by peripheral"
 msgstr ""
@@ -676,6 +655,7 @@ msgstr ""
 msgid "Boot device must be first (interface #0)."
 msgstr ""
 
+#: ports/analog/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr ""
@@ -744,10 +724,6 @@ msgstr ""
 msgid "CIRCUITPY drive could not be found or created."
 msgstr ""
 
-#: ports/analog/common-hal/busio/SPI.c
-msgid "CPOL / CPHA must both be either 0 or 1\n"
-msgstr ""
-
 #: ports/espressif/common-hal/espidf/__init__.c
 msgid "CRC or checksum was invalid"
 msgstr ""
@@ -974,30 +950,6 @@ msgstr ""
 msgid "ERR: Could not init ringbuffer\n"
 msgstr ""
 
-#: ports/analog/peripherals/max32690/max32_uart.c
-#, c-format
-msgid ""
-"ERR: Unable to find a uart matching pins...\n"
-"TX: port %d mask %d\n"
-"RX: port %d mask %d\n"
-msgstr ""
-
-#: ports/analog/peripherals/max32690/max32_i2c.c
-#, c-format
-msgid ""
-"ERR: Unable to find an I2C matching pins...\n"
-"SCL: port %d mask %d\n"
-"SDA: port %d mask %d\n"
-msgstr ""
-
-#: ports/analog/peripherals/max32690/max32_spi.c
-#, c-format
-msgid ""
-"ERR: Unable to find an SPI matching pins...         \n"
-"MOSI: port %d mask %d\n"
-"MISO: port %d mask %d\n"
-msgstr ""
-
 #: ports/analog/common-hal/busio/I2C.c
 msgid "ERROR during I2C Transaction\n"
 msgstr ""
@@ -1095,19 +1047,6 @@ msgstr ""
 msgid "Failed to enable continuous"
 msgstr ""
 
-#: ports/analog/common-hal/busio/I2C.c
-#, c-format
-msgid "Failed to init I2C. ERR: %d\n"
-msgstr ""
-
-#: ports/analog/common-hal/busio/SPI.c
-msgid "Failed to init SPI.\n"
-msgstr ""
-
-#: ports/analog/common-hal/busio/UART.c
-msgid "Failed to initialize UART.\n"
-msgstr ""
-
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr ""
@@ -1121,11 +1060,6 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr ""
 
-#: ports/analog/common-hal/busio/I2C.c
-#, c-format
-msgid "Failed to set I2C frequency. ERR: %d\n"
-msgstr ""
-
 #: ports/analog/common-hal/busio/SPI.c
 msgid "Failed to set SPI Clock Mode\n"
 msgstr ""
@@ -1178,10 +1112,6 @@ msgstr ""
 msgid "Firmware is too big"
 msgstr ""
 
-#: ports/analog/common-hal/busio/UART.c
-msgid "Flow Ctrl needs both CTS & RTS"
-msgstr ""
-
 #: shared-bindings/bitmaptools/__init__.c
 msgid "For L8 colorspace, input bitmap must have 8 bits per pixel"
 msgstr ""
@@ -1241,10 +1171,6 @@ msgstr ""
 msgid "I2C init error"
 msgstr ""
 
-#: ports/analog/common-hal/busio/I2C.c
-msgid "I2C needs SDA & SCL"
-msgstr ""
-
 #: ports/raspberrypi/common-hal/busio/I2C.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "I2C peripheral in use"
@@ -1348,6 +1274,10 @@ msgstr ""
 msgid "Interrupted by output function"
 msgstr ""
 
+#: ports/analog/common-hal/busio/UART.c
+#: ports/analog/peripherals/max32690/max32_i2c.c
+#: ports/analog/peripherals/max32690/max32_spi.c
+#: ports/analog/peripherals/max32690/max32_uart.c
 #: ports/espressif/common-hal/_bleio/Service.c
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/espressif/common-hal/microcontroller/Processor.c
@@ -1858,10 +1788,6 @@ msgstr ""
 msgid "Parameter error"
 msgstr ""
 
-#: ports/analog/common-hal/busio/UART.c
-msgid "Parity must be ODD, EVEN, or NONE\n"
-msgstr ""
-
 #: ports/espressif/common-hal/audiobusio/__init__.c
 msgid "Peripheral in use"
 msgstr ""
@@ -2286,6 +2212,14 @@ msgstr ""
 msgid "UART re-init"
 msgstr ""
 
+#: ports/analog/common-hal/busio/UART.c
+msgid "UART read error"
+msgstr ""
+
+#: ports/analog/common-hal/busio/UART.c
+msgid "UART transaction timeout"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write"
 msgstr ""
@@ -2322,6 +2256,10 @@ msgstr ""
 msgid "UUID value is not str, int or byte buffer"
 msgstr ""
 
+#: ports/analog/common-hal/busio/UART.c
+msgid "Uart transaction timed out."
+msgstr ""
+
 #: ports/raspberrypi/common-hal/memorymap/AddressRange.c
 msgid "Unable to access unaligned IO register"
 msgstr ""