Add Jienuo JN-603-D-WIFI

Author: davidebeatrici

README.md

@@ -38,6 +38,7 @@ Imou IPC-C22E-S2-v2      SSC335DE     GC2053    RTL8188FU_USB    NOR_16M   done
 Imou IPC-C22EP-S2        SSC325DE     SC2239    RTL8188FU_USB    NAND      testing stage 1
 Imou IPC-C22EP-S2 ?      SSC325DE     SC2335    RTL8188FU_USB    NAND      wait driver
 Imou IPC-F22AP           SSC325       SC2239    -                NOR_?     preparation
+Jienuo JN-603-D-WIFI     T31X         SC5235    RTL8733BU_USB    NOR_16M   done
 JVS INGT10 GQS60EP       T10A         OV9750    -                NOR_8M    done
 Lenovo Snowman 1080P     HI3518EV200  SC2035    RTL8188EUS_USB   NOR_16M   in progress, LightSensor-no
 Meari Speed 6S           SSC333       JXF37     RTL8188FU_USB    NOR_16M   video-yes, wifi-yes, motors-no

devices/t31_ultimate_jienuo-jn-603-d-wifi/br-ext-chip-ingenic/configs/t31_ultimate_jienuo-jn-603-d-wifi_defconfig

@@ -0,0 +1,73 @@
+# Architecture
+BR2_mipsel=y
+BR2_mips_xburst=y
+# BR2_MIPS_SOFT_FLOAT is not set
+BR2_MIPS_FP32_MODE_32=y
+
+# Toolchain
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
+BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
+BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/openipc/firmware/releases/download/$(OPENIPC_TOOLCHAIN).tgz"
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="mipsel-openipc-linux-musl"
+BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/openipc/linux/archive/$(OPENIPC_KERNEL).tar.gz"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(EXTERNAL_VENDOR)/board/$(OPENIPC_SOC_FAMILY)/t31.generic.config"
+BR2_LINUX_KERNEL_LZMA=y
+
+# Filesystem
+BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL)/package/busybox/busybox.config"
+BR2_PACKAGE_UBOOT_TOOLS=y
+# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
+BR2_PACKAGE_MOSQUITTO=y
+# BR2_PACKAGE_MOSQUITTO_BROKER is not set
+BR2_PACKAGE_WIREGUARD_LINUX_COMPAT=y
+BR2_PACKAGE_WIREGUARD_TOOLS=y
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_SQUASHFS=y
+BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y
+
+# OpenIPC
+BR2_OPENIPC_SOC_VENDOR="ingenic"
+BR2_OPENIPC_SOC_MODEL="t31"
+BR2_OPENIPC_SOC_FAMILY="t31"
+BR2_OPENIPC_SNS_MODEL="sc5235"
+BR2_OPENIPC_VARIANT="ultimate"
+BR2_OPENIPC_FLASH_SIZE="16"
+
+# Packages
+BR2_PACKAGE_DROPBEAR_OPENIPC=y
+BR2_PACKAGE_INGENIC_OSDRV_T31=y
+BR2_PACKAGE_IPCTOOL=y
+BR2_PACKAGE_JSONFILTER=y
+BR2_PACKAGE_LAME_OPENIPC=y
+BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y
+# BR2_PACKAGE_LIBCURL_OPENIPC_PROXY_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_COOKIES_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set
+BR2_PACKAGE_LIBEVENT_OPENIPC=y
+BR2_PACKAGE_LIBOGG_OPENIPC=y
+BR2_PACKAGE_LIBWEBSOCKETS_OPENIPC=y
+BR2_PACKAGE_MAJESTIC_FONTS=y
+BR2_PACKAGE_MAJESTIC_WEBUI=y
+BR2_PACKAGE_MAJESTIC=y
+BR2_PACKAGE_MOTORS=y
+BR2_PACKAGE_OPUS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC_FIXED_POINT=y
+BR2_PACKAGE_QUIRC_OPENIPC=y
+BR2_PACKAGE_RTL8733BU_OPENIPC=y
+BR2_PACKAGE_UACME_OPENIPC=y
+BR2_PACKAGE_VTUND_OPENIPC=y
+BR2_PACKAGE_YAML_CLI=y
+BR2_PACKAGE_ZEROTIER_ONE=y

devices/t31_ultimate_jienuo-jn-603-d-wifi/general/overlay/usr/share/openipc/customizer.sh

@@ -0,0 +1,30 @@
+#!/bin/sh
+#
+# Perform basic settings on a known IP camera
+#
+#
+# Set custom upgrade url
+#
+fw_setenv upgrade 'https://github.com/OpenIPC/builder/releases/download/latest/t31_ultimate_jienuo-jn-603-d-wifi-nor.tgz'
+#
+#
+# Set custom majestic settings
+#
+cli -s .nightMode.irCutPin1 58
+cli -s .nightMode.irCutPin2 57
+cli -s .video0.codec h264
+#
+#
+# Set wlan device and credentials if need
+#
+fw_setenv wlandev rtl8733bu-t31-camhipro
+#fw_setenv wlanssid Router
+#fw_setenv wlanpass 12345678
+#
+#
+# Set osmem and rmem
+#
+fw_setenv osmem 64M
+fw_setenv rmem 64M@0x4000000
+#
+exit 0