fix: broken links / anchors

Author: LaurenceJJones

crowdsec-docs/docs/appsec/configuration.md

@@ -22,7 +22,7 @@ The AppSec Component configuration consists of three main parts:
 
 The goals of the acquisition file are:
 - To specify the **address** and **port** where the AppSec-enabled Remediation Component(s) will forward the requests to.
-- And specify one or more [AppSec configuration files](#appsec-configuration) to use as definition of what rules to apply and how. 
+- And specify one or more [AppSec configuration files](#appsec-configuration-files) to use as definition of what rules to apply and how. 
 
 Details can be found in the [AppSec Datasource page](/log_processor/data_sources/appsec.md).
 

crowdsec-docs/docs/appsec/quickstart/general.mdx

@@ -203,4 +203,4 @@ If the AppSec Component fails to start:
 3. **Check configuration syntax**: Validate your `appsec.yaml` file
 4. **Review logs**: Check `/var/log/crowdsec.log` for error messages
 
-For detailed troubleshooting, see the [AppSec Troubleshooting Guide](/appsec/troubleshooting).
+For detailed troubleshooting, see the [AppSec Troubleshooting Guide](/appsec/troubleshooting.md).

crowdsec-docs/docs/appsec/quickstart/nginxopenresty.mdx

@@ -59,7 +59,7 @@ sudo cscli collections install crowdsecurity/appsec-virtual-patching crowdsecuri
 Executing this command will install the following items:
 
 - The [*AppSec Rules*](/appsec/rules_syntax.md) contain the definition of malevolent requests to be matched and stopped
-- The [*AppSec Configuration*](/appsec/configuration.md#appsec-configuration) links together a set of rules to provide a coherent set
+- The [*AppSec Configuration*](/appsec/configuration.md#appsec-configuration-files) links together a set of rules to provide a coherent set
 - The <UnderlineTooltip tooltip="YAML files that extract relevant data from logs, such as IP addresses, timestamps, or request paths.">CrowdSec Parser</UnderlineTooltip> and <UnderlineTooltip tooltip="Behavioral rules written in a domain-specific language that define what malicious activity looks like, such as multiple failed logins in a short time.">CrowdSec Scenario(s)</UnderlineTooltip> bans for a longer duration repeating offenders
 
 ### Setup the Acquisition
@@ -82,7 +82,7 @@ Steps:
 
 The two important directives in this configuration file are:
 
- - `appsec_config` is the name of the [*AppSec Configuration*](appsec/configuration.md#appsec-configuration) that was included in the <UnderlineTooltip tooltip="Collections are bundle of parsers, scenarios, postoverflows that form a coherent package.">Collection</UnderlineTooltip> we just installed.
+ - `appsec_config` is the name of the [*AppSec Configuration*](/appsec/configuration.md#appsec-configuration-files) that was included in the <UnderlineTooltip tooltip="Collections are bundle of parsers, scenarios, postoverflows that form a coherent package.">Collection</UnderlineTooltip> we just installed.
  - the `listen_addr` is the IP and port the AppSec Component will listen to.
 
 :::warning

crowdsec-docs/docs/appsec/quickstart/traefik.mdx

@@ -63,7 +63,7 @@ docker exec -it crowdsec cscli collections install crowdsecurity/appsec-virtual-
 Executing this command or updating the compose will install the following items:
 
 - The [*AppSec Rules*](/appsec/rules_syntax.md) contain the definition of malevolent requests to be matched and stopped.
-- The [*AppSec Configuration*](/appsec/configuration.md#appsec-configuration) links together a set of rules to provide a coherent set.
+- The [*AppSec Configuration*](/appsec/configuration.md#appsec-configuration-files) links together a set of rules to provide a coherent set.
 - The <UnderlineTooltip tooltip="YAML files that extract relevant data from logs, such as IP addresses, timestamps, or request paths.">CrowdSec Parser</UnderlineTooltip> and <UnderlineTooltip tooltip="Behavioral rules written in a domain-specific language that define what malicious activity looks like, such as multiple failed logins in a short time.">CrowdSec Scenario(s)</UnderlineTooltip> are used to detect and remediate persistent attacks.
 
 Once you have updated your compose or installed via the command line, will we need to restart the container. However, before we do that, we need to setup the acquisition for the AppSec Component.

crowdsec-docs/docs/appsec/quickstart/wordpress.mdx

@@ -53,7 +53,7 @@ sudo cscli collections install crowdsecurity/appsec-virtual-patching crowdsecuri
 Executing this command will install the following items:
 
 - The [*AppSec Rules*](/appsec/rules_syntax.md) contain the definition of malevolent requests to be matched and stopped
-- The [*AppSec Configuration*](/appsec/configuration.md#appsec-configuration) links together a set of rules to provide a coherent set
+- The [*AppSec Configuration*](/appsec/configuration.md#appsec-configuration-files) links together a set of rules to provide a coherent set
 - The <UnderlineTooltip tooltip="YAML files that extract relevant data from logs, such as IP addresses, timestamps, or request paths.">CrowdSec Parser</UnderlineTooltip> and <UnderlineTooltip tooltip="Behavioral rules written in a domain-specific language that define what malicious activity looks like, such as multiple failed logins in a short time.">CrowdSec Scenario(s)</UnderlineTooltip> bans for a longer duration repeating offenders
 
 ### Setup the Acquisition
@@ -76,7 +76,7 @@ Steps:
 
 The two important directives in this configuration file are:
 
- - `appsec_config` is the name of the [*AppSec Configuration*](appsec/configuration.md#appsec-configuration) that was included in the <UnderlineTooltip tooltip="Collections are bundle of parsers, scenarios, postoverflows that form a coherent package.">Collection</UnderlineTooltip> we just installed.
+ - `appsec_config` is the name of the [*AppSec Configuration*](/appsec/configuration.md#appsec-configuration-files) that was included in the <UnderlineTooltip tooltip="Collections are bundle of parsers, scenarios, postoverflows that form a coherent package.">Collection</UnderlineTooltip> we just installed.
  - the `listen_addr` is the IP and port the AppSec Component will listen to.
 
 :::warning

crowdsec-docs/docs/appsec/troubleshooting.md

@@ -63,7 +63,7 @@ DEBU[2023-12-06 15:40:26] Finish evaluating rule                        band=inb
 ## Authenticating with the AppSec Component
 
 :::note
-We are assuming the AppSec engine is running on `127.0.0.1:7422`. See [installation directives](/docs/next/appsec/installation)
+We are assuming the AppSec engine is running on `127.0.0.1:7422`. See [installation directives](/appsec/quickstart/general.mdx)
 :::
 
 > Create a valid API Key

crowdsec-docs/docs/central_api/intro.md

@@ -15,7 +15,7 @@ The [Central API](https://crowdsecurity.github.io/api_doc/capi/) is the service
 This information is *only* going to be pushed when a scenario is coming from the hub and is unmodified. Custom scenarios, tainted scenarios and manual decisions are *not* pushed unless enrolled into the console.
 :::
 
-When the Security Engine generates an alert, [unless you opt-out of it](/u/troubleshooting/intro#how-to-disable-the-central-api), it will push "signal meta-data". The meta-data are :
+When the Security Engine generates an alert, [unless you opt-out of it](/u/troubleshooting/security_engine#how-to-disable-the-central-api), it will push "signal meta-data". The meta-data are :
  - The name of the scenario that was triggered
  - The hash & version of the scenario that was triggered
  - The timestamp of the decision

crowdsec-docs/docs/concepts.md

@@ -12,7 +12,7 @@ sidebar_position: 1
 > The Security Engine is CrowdSec's IDS/IPS (Intrusion Detection System/Intrusion Prevention System)
 > It is a rules and behavior detection engine comprised of Log Processor and the Local API.
 
-A Security Engine can operate [independently](/intro#architecture) or in a [distributed manner](/intro#deployment-options), adapting to the specific needs and constraints of your infrastructure. For more information on CrowdSec's distributed approach, visit our documentation on collaborative operations and distributed deployments.
+A Security Engine can operate [independently](intro.mdx#architecture) or in a [distributed manner](intro.mdx#deployment-options), adapting to the specific needs and constraints of your infrastructure. For more information on CrowdSec's distributed approach, visit our documentation on collaborative operations and distributed deployments.
 
 
 # Log Processor (LP)
@@ -50,7 +50,7 @@ Remediations components leverage existing components of your infrastructure to b
 
 > The Central API (CAPI) serves as the gateway for network participants to connect and communicate with CrowdSec's network.
 
-The Central API (abreviated as `CAPI`) receives attack signals from all participating Security Engines and signal partners, then re-distribute them curated community decisions ([Community Blocklist](/central_api/community_blocklist/)).   
+The Central API (abreviated as `CAPI`) receives attack signals from all participating Security Engines and signal partners, then re-distribute them curated community decisions ([Community Blocklist](/central_api/blocklist.md)).   
 It's also at the heart of CrowdSec centralized [Blocklist services](/u/blocklists/intro).
 
 # Console
@@ -61,4 +61,4 @@ The [Console](https://app.crowdsec.net) allows you to:
  - [Manage alerts](/u/console/alerts/intro) of your security stack
  - [Manage decisions](/u/console/decisions/decisions_intro) in real-time
  - View and use [blocklists and integrations](/u/blocklists/intro)
- - Manage your API keys ([CTI API](/u/cti_api/intro), [Service API](/u/service_api/getting_started))
+ - Manage your API keys ([CTI API](/u/cti_api/intro), [Service API](/u/console/service_api/getting_started))

crowdsec-docs/docs/configuration/network_management.md

@@ -17,7 +17,7 @@ id: network_management
  - Local API connects to `tcp/443` on `papi.api.crowdsec.net` (console management)
  - `cscli` connects to `tcp/443` on `hub-cdn.crowdsec.net` to fetch scenarios, parsers etc. (1)
  - `cscli` connects to `tcp/443` on `version.crowdsec.net` to check latest version available. (1)
- - [`cscli dashboard`](/cscli/cscli_dashboard.md) fetches metabase configuration from a s3 bucket (`https://crowdsec-statics-assets.s3-eu-west-1.amazonaws.com/`)
+ - Dashboard-related functionality may connect to external services for configuration
  - Installation script is hosted on `install.crowdsec.net` over HTTPS.
  - Repositories are hosted on `packagecloud.io` over HTTPS.
 

crowdsec-docs/docs/contributing/bouncers.md

@@ -17,8 +17,8 @@ Sharing on the hub allows other users to find and use it. While increasing your
 #### Specs
 
 Remediation components have mandatory and optional features, they are described in the following sub pages:
-- [Specifications for Remediation Component and AppSec Capabilities](/contributing/specs/bouncer_appsec_specs)
-- [Remediation Component Metrics](/contributing/specs/bouncer_metrics_specs)
+- [Specifications for Remediation Component and AppSec Capabilities](/contributing/specs/bouncer_appsec_specs.mdx)
+- [Remediation Component Metrics](/contributing/specs/bouncer_metrics_specs.mdx)
 
 *Don't hesitate to get in touch with us via discord if anything is unclear to you*