Add shelly wave motion driver

drivers/SmartThings/zwave-sensor/fingerprints.yml

@@ -542,6 +542,12 @@ zwaveManufacturer:
     productType: 0x0000
     productId: 0x0001
     deviceProfileName: base-water
+  - id: shelly/wave/motion
+    deviceLabel: Shelly Wave Motion
+    manufacturerId: 0x0460
+    productType: 0x0100
+    productId: 0x0082
+    deviceProfileName: shelly-wave-motion
 zwaveGeneric:
   - id: "GenericSensorAlarm"
     deviceLabel: Z-Wave Sensor

drivers/SmartThings/zwave-sensor/profiles/shelly-wave-motion.yml

@@ -0,0 +1,59 @@
+name: shelly-wave-motion
+components:
+- id: main
+  capabilities:
+  - id: motionSensor
+    version: 1
+  - id: illuminanceMeasurement
+    version: 1
+    config:
+      values:
+        - key: "illuminance.value"
+          range: [0, 10000]
+  - id: battery
+    version: 1
+  - id: refresh
+    version: 1
+  categories:
+  - name: ContactSensor
+preferences:
+  - name: "ledOpnClsChangeStat"
+    title: "P157: open/close change status"
+    description: "This parameter enables open/close status change by LED indicator."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        0 : "LED ind.disabled"
+        1 : "LED ind.enabled"
+      default: 0
+  - name: "sensitivity"
+    title: "P158: sensitivity"
+    description: "Sensitivity"
+
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        0 : "low sensitivity"
+        1 : "moderate sensitivity"
+        2 : "high sensitivity"
+      default: 0
+  - name: "blindTime"
+    title: "P159: Motion Blind time"
+    description: "Blind time in seconds after last detected motion"
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 2
+      maximum : 8
+      default: 5
+  - name: "motionNotdetRepT"
+    title: "P160:Motion not detect.rep.time"
+    description: "Time after last detected motion for device to send motion not detected"
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 1
+      maximum : 32767
+      default: 30

drivers/SmartThings/zwave-sensor/src/init.lua

@@ -152,7 +152,8 @@ local driver_template = {
     lazy_load_if_possible("v1-contact-event"),
     lazy_load_if_possible("timed-tamper-clear"),
     lazy_load_if_possible("wakeup-no-poll"),
-    lazy_load_if_possible("apiv6_bugfix")
+    lazy_load_if_possible("apiv6_bugfix"),
+    lazy_load_if_possible("shelly-wave-motion")
   },
   lifecycle_handlers = {
     added = added_handler,

drivers/SmartThings/zwave-sensor/src/preferences.lua

@@ -148,7 +148,20 @@ local devices = {
       ledLowBrightness = {parameter_number = 82, size = 2},
       ledHighBrightness = {parameter_number = 83, size = 2}
     }
-  }
+  },
+  SHELLY_WAVE_MOTION_SENSOR = {
+    MATCHING_MATRIX = {
+      mfrs = 0x0460,
+      product_types = 0x0100,
+      product_ids = {0x0082}
+    },
+    PARAMETERS = {
+      ledOpnClsChangeStat = {parameter_number = 157, size = 1},
+      sensitivity = {parameter_number = 158, size = 1},
+      blindTime = {parameter_number = 159, size = 2},
+      motionNotdetRepT = {parameter_number = 160, size = 2},
+    },
+  },
 }
 local preferences = {}