`tidyfast v0.4.0`

Note: The expansion of dtplyr has made some of the functionality in tidyfast redundant. See dtplyr for a list of functions that are handled within that framework.

The goal of tidyfast is to provide fast and efficient alternatives to some tidyr (and a few dplyr) functions using data.table under the hood. Each have the prefix of dt_ to allow for autocomplete in IDEs such as RStudio. These should compliment some of the current functionality in dtplyr (but notably does not use the lazy_dt() framework of dtplyr). This package imports data.table and cpp11 (no other dependencies).

These are, in essence, translations from a more tidyverse grammar to data.table. Most functions herein are in places where, in my opinion, the data.table syntax is not obvious or clear. As such, these functions can translate a simple function call into the fast, efficient, and concise syntax of data.table.

The current functions include:

Nesting and unnesting (similar to dplyr::group_nest() and tidyr::unnest()):

dt_nest() for nesting data tables
dt_unnest() for unnesting data tables
dt_hoist() for unnesting vectors in a list-column in a data table

Pivoting (similar to tidyr::pivot_longer() and tidyr::pivot_wider())

dt_pivot_longer() for fast pivoting using data.table::melt()
dt_pivot_wider() for fast pivoting using data.table::dcast()

If Else (similar to dplyr::case_when()):

dt_case_when() for dplyr::case_when() syntax with the speed of data.table::fifelse()

Fill (similar to tidyr::fill())

dt_fill() for filling NA values with values before it, after it, or both. This can be done by a grouping variable (e.g. fill in NA values with values within an individual).

Count and Uncount (similar to tidyr::uncount() and dplyr::count())

dt_count() for fast counting by group(s)
dt_uncount() for creating full data from a count table

Separate (similar to tidyr::separate())

dt_separate() for splitting a single column into multiple based on a match within the column (e.g., column with values like “A.B” could be split into two columns by using the period as the separator where column 1 would have “A” and 2 would have “B”). It is built on data.table::tstrsplit(). This is not well tested yet and lacks some functionality of tidyr::separate().

Adjust data.table print options

dt_print_options() for adjusting the options for print.data.table()

General API

tidyfast attempts to convert syntax from tidyr with its accompanying grammar to data.table function calls. As such, we have tried to maintain the tidyr syntax as closely as possible without hurting speed and efficiency. Some more advanced use cases in tidyr may not translate yet. We try to be transparent about the shortcomings in syntax and behavior where known.

Each function that takes data (labeled as dt_ in the package docs) as its first argument automatically coerces it to a data table with as.data.table() if it isn’t already a data table. Each of these functions will return a data table.

Installation

You can install the stable version from CRAN with:

install.packages("tidyfast")

or you can install the development version from GitHub with:

# install.packages("remotes")
remotes::install_github("TysonStanley/tidyfast")

#> ℹ Loading tidyfast

Examples

The initial versions of the nesting and unnesting functions were shown in a preprint. Herein is shown some simple applications and the functions’ speed/efficiency.

library(tidyfast)

Nesting and Unnesting

The following data table will be used for the nesting/unnesting examples.

set.seed(84322)

library(data.table)
library(dplyr)       # to compare with case_when()
library(tidyr)       # to compare with fill() and separate()
library(ggplot2)     # figures
library(ggbeeswarm)  # figures

dt <- data.table(
   x = rnorm(1e5),
   y = runif(1e5),
   grp = sample(1L:5L, 1e5, replace = TRUE),
   nested1 = lapply(1:10, sample, 10, replace = TRUE),
   nested2 = lapply(c("thing1", "thing2"), sample, 10, replace = TRUE),
   id = 1:1e5)

To make all the comparisons herein more equal, we will set the number of threads that data.table will use to 1.

setDTthreads(1)

We can nest this data using dt_nest():

nested <- dt_nest(dt, grp)
nested
#> Key: <grp>
#>      grp                  data
#>    <int>                <list>
#> 1:     1 <data.table[19638x5]>
#> 2:     2 <data.table[19987x5]>
#> 3:     3 <data.table[20033x5]>
#> 4:     4 <data.table[20269x5]>
#> 5:     5 <data.table[20073x5]>

We can also unnest this with dt_unnest():

dt_unnest(nested, col = data)
#> Key: <grp>
#>           grp          x           y               nested1
#>         <int>      <num>       <num>                <list>
#>      1:     1 -1.1813164 0.004599736       2,2,1,2,1,1,...
#>      2:     1 -1.0384420 0.853208540       2,8,4,6,7,7,...
#>      3:     1 -0.6247028 0.072652533       4,2,2,1,1,1,...
#>      4:     1 -1.3651514 0.569079215       1,1,1,3,6,2,...
#>      5:     1  0.1403744 0.864617284 10, 1, 1, 1, 8, 1,...
#>     ---                                                   
#>  99996:     5 -0.3437795 0.995197776       2,1,2,2,2,1,...
#>  99997:     5  1.6157744 0.241735719 10, 1, 1, 1, 8, 1,...
#>  99998:     5 -0.1321246 0.885283934       2,3,3,2,2,4,...
#>  99999:     5 -1.7019715 0.524621296       5,4,3,3,3,2,...
#> 100000:     5  0.3821493 0.032851280       2,8,4,6,7,7,...
#>                                               nested2    id
#>                                                <list> <int>
#>      1: thing2,thing2,thing2,thing2,thing2,thing2,...     2
#>      2: thing2,thing2,thing2,thing2,thing2,thing2,...     8
#>      3: thing1,thing1,thing1,thing1,thing1,thing1,...    15
#>      4: thing1,thing1,thing1,thing1,thing1,thing1,...    17
#>      5: thing2,thing2,thing2,thing2,thing2,thing2,...    20
#>     ---                                                    
#>  99996: thing1,thing1,thing1,thing1,thing1,thing1,... 99983
#>  99997: thing2,thing2,thing2,thing2,thing2,thing2,... 99990
#>  99998: thing2,thing2,thing2,thing2,thing2,thing2,... 99994
#>  99999: thing2,thing2,thing2,thing2,thing2,thing2,... 99996
#> 100000: thing2,thing2,thing2,thing2,thing2,thing2,... 99998
#>                          data
#>                        <list>
#>      1: <data.table[19638x5]>
#>      2: <data.table[19638x5]>
#>      3: <data.table[19638x5]>
#>      4: <data.table[19638x5]>
#>      5: <data.table[19638x5]>
#>     ---                      
#>  99996: <data.table[20073x5]>
#>  99997: <data.table[20073x5]>
#>  99998: <data.table[20073x5]>
#>  99999: <data.table[20073x5]>
#> 100000: <data.table[20073x5]>

When our list columns don’t have data tables (as output from dt_nest()) we can use the dt_hoist() function, that will unnest vectors. It keeps all the other variables that are not list-columns as well.

dt_hoist(dt, nested1, nested2)
#>                  x         y   grp     id nested1 nested2
#>              <num>     <num> <int>  <int>   <int>  <char>
#>       1: 0.1720703 0.3376675     2      1       1  thing1
#>       2: 0.1720703 0.3376675     2      1       1  thing1
#>       3: 0.1720703 0.3376675     2      1       1  thing1
#>       4: 0.1720703 0.3376675     2      1       1  thing1
#>       5: 0.1720703 0.3376675     2      1       1  thing1
#>      ---                                                 
#>  999996: 0.6268181 0.7851774     1 100000       1  thing2
#>  999997: 0.6268181 0.7851774     1 100000       5  thing2
#>  999998: 0.6268181 0.7851774     1 100000       7  thing2
#>  999999: 0.6268181 0.7851774     1 100000       6  thing2
#> 1000000: 0.6268181 0.7851774     1 100000       7  thing2

Speed comparisons (similar to those shown in the preprint) are highlighted below. Notably, the timings are without the nested1 and nested2 columns of the original dt object from above. Also, all dplyr and tidyr functions use a tbl version of the dt table.

#> # A tibble: 2 × 3
#>   expression   median mem_alloc
#>   <chr>      <bch:tm> <bch:byt>
#> 1 dt_nest      1.14ms    2.88MB
#> 2 group_nest   1.91ms    5.12MB
#> # A tibble: 2 × 3
#>   expression   median mem_alloc
#>   <chr>      <bch:tm> <bch:byt>
#> 1 dt_unnest    2.08ms   11.84MB
#> 2 unnest       2.33ms    5.96MB

Pivoting

Thanks to @markfairbanks, we now have pivoting translations to data.table::melt() and data.table::dcast(). Consider the following example (similar to the example in tidyr::pivot_longer() and tidyr::pivot_wider()):

billboard <- tidyr::billboard

# note the warning - melt is telling us what 
#   it did with the various data types---logical (where there were just NAs
#   and numeric
longer <- billboard %>%
  dt_pivot_longer(
     cols = c(-artist, -track, -date.entered),
     names_to = "week",
     values_to = "rank"
  )
#> Warning in melt.data.table(data = dt_, id.vars = id_vars, measure.vars = cols,
#> : 'measure.vars' [wk1, wk2, wk3, wk4, ...] are not all of the same type. By
#> order of hierarchy, the molten data value column will be of type 'double'. All
#> measure variables not of type 'double' will be coerced too. Check DETAILS in
#> ?melt.data.table for more on coercion.
longer
#>                  artist                   track date.entered   week  rank
#>                  <char>                  <char>       <Date> <char> <num>
#>     1:            2 Pac Baby Don't Cry (Keep...   2000-02-26    wk1    87
#>     2:          2Ge+her The Hardest Part Of ...   2000-09-02    wk1    91
#>     3:     3 Doors Down              Kryptonite   2000-04-08    wk1    81
#>     4:     3 Doors Down                   Loser   2000-10-21    wk1    76
#>     5:         504 Boyz           Wobble Wobble   2000-04-15    wk1    57
#>    ---                                                                   
#> 24088:      Yankee Grey    Another Nine Minutes   2000-04-29   wk76    NA
#> 24089: Yearwood, Trisha         Real Live Woman   2000-04-01   wk76    NA
#> 24090:  Ying Yang Twins Whistle While You Tw...   2000-03-18   wk76    NA
#> 24091:    Zombie Nation           Kernkraft 400   2000-09-02   wk76    NA
#> 24092:  matchbox twenty                    Bent   2000-04-29   wk76    NA

wider <- longer %>% 
  dt_pivot_wider(
    names_from = week,
    values_from = rank
  )
wider[, .(artist, track, wk1, wk2)]
#>                artist                   track   wk1   wk2
#>                <char>                  <char> <num> <num>
#>   1:            2 Pac Baby Don't Cry (Keep...    87    82
#>   2:          2Ge+her The Hardest Part Of ...    91    87
#>   3:     3 Doors Down              Kryptonite    81    70
#>   4:     3 Doors Down                   Loser    76    76
#>   5:         504 Boyz           Wobble Wobble    57    34
#>  ---                                                     
#> 313:      Yankee Grey    Another Nine Minutes    86    83
#> 314: Yearwood, Trisha         Real Live Woman    85    83
#> 315:  Ying Yang Twins Whistle While You Tw...    95    94
#> 316:    Zombie Nation           Kernkraft 400    99    99
#> 317:  matchbox twenty                    Bent    60    37

Notably, there are some current limitations to these: 1) tidyselect techniques do not work across the board (e.g. cannot use start_with() and friends) and 2) the functions are new and likely prone to edge-case bugs.

But let’s compare some basic speed and efficiency. Because of the data.table functions, these are extremely fast and efficient.

#> # A tibble: 4 × 3
#>   expression        median mem_alloc
#>   <chr>           <bch:tm> <bch:byt>
#> 1 dt_pivot_longer 359.98µs 1001.23KB
#> 2 pivot_longer      1.94ms    1.73MB
#> 3 dt_pivot_wider     5.8ms    1.99MB
#> 4 pivot_wider       3.87ms    2.71MB

If Else

Also, the new dt_case_when() function is built on the very fast data.table::fiflese() but has syntax like unto dplyr::case_when(). That is, it looks like:

dt_case_when(condition1 ~ label1,
             condition2 ~ label2,
             ...)

To show that each method, dt_case_when(), dplyr::case_when(), and data.table::fifelse() produce the same result, consider the following example.

x <- rnorm(1e6)

medianx <- median(x)
x_cat <-
  dt_case_when(x < medianx ~ "low",
               x >= medianx ~ "high",
               is.na(x) ~ "unknown")
x_cat_dplyr <-
  case_when(x < medianx ~ "low",
            x >= medianx ~ "high",
            is.na(x) ~ "unknown")
x_cat_fif <-
  fifelse(x < medianx, "low",
  fifelse(x >= medianx, "high",
  fifelse(is.na(x), "unknown", NA_character_)))

identical(x_cat, x_cat_dplyr)
#> [1] TRUE
identical(x_cat, x_cat_fif)
#> [1] TRUE

Notably, dt_case_when() is very fast and memory efficient, given it is built on data.table::fifelse().

#> # A tibble: 3 × 3
#>   expression     median mem_alloc
#>   <chr>        <bch:tm> <bch:byt>
#> 1 case_when      45.2ms    72.5MB
#> 2 dt_case_when   10.7ms    19.1MB
#> 3 fifelse        20.1ms    34.3MB

Fill

A new function is dt_fill(), which fulfills the role of tidyr::fill() to fill in NA values with values around it (either the value above, below, or trying both). This currently relies on the efficient C++ code from tidyr (fillUp() and fillDown()).

x = 1:10
dt_with_nas <- data.table(
  x = x,
  y = shift(x, 2L),
  z = shift(x, -2L),
  a = sample(c(rep(NA, 10), x), 10),
  id = sample(1:3, 10, replace = TRUE)
)

# Original
dt_with_nas
#>         x     y     z     a    id
#>     <int> <int> <int> <int> <int>
#>  1:     1    NA     3    NA     3
#>  2:     2    NA     4     9     3
#>  3:     3     1     5    NA     1
#>  4:     4     2     6     8     3
#>  5:     5     3     7    NA     2
#>  6:     6     4     8    NA     2
#>  7:     7     5     9     7     3
#>  8:     8     6    10    NA     2
#>  9:     9     7    NA    NA     2
#> 10:    10     8    NA     4     2

# All defaults
dt_fill(dt_with_nas, y, z, a, immutable = FALSE)
#>         x     y     z     a    id
#>     <int> <int> <int> <int> <int>
#>  1:     1    NA     3    NA     3
#>  2:     2    NA     4     9     3
#>  3:     3     1     5     9     1
#>  4:     4     2     6     8     3
#>  5:     5     3     7     8     2
#>  6:     6     4     8     8     2
#>  7:     7     5     9     7     3
#>  8:     8     6    10     7     2
#>  9:     9     7    10     7     2
#> 10:    10     8    10     4     2

# by id variable called `grp`
dt_fill(dt_with_nas, 
        y, z, a, 
        id = list(id))
#>         x     y     z     a    id
#>     <int> <int> <int> <int> <int>
#>  1:     1    NA     3    NA     3
#>  2:     2    NA     4     9     3
#>  3:     3     1     5     9     1
#>  4:     4     2     6     8     3
#>  5:     5     3     7     8     2
#>  6:     6     4     8     8     2
#>  7:     7     5     9     7     3
#>  8:     8     6    10     7     2
#>  9:     9     7    10     7     2
#> 10:    10     8    10     4     2

# both down and then up filling by group
dt_fill(dt_with_nas, 
        y, z, a, 
        id = list(id), 
        .direction = "downup")
#>         x     y     z     a    id
#>     <int> <int> <int> <int> <int>
#>  1:     1     2     3     9     3
#>  2:     2     2     4     9     3
#>  3:     3     1     5     9     1
#>  4:     4     2     6     8     3
#>  5:     5     3     7     8     2
#>  6:     6     4     8     8     2
#>  7:     7     5     9     7     3
#>  8:     8     6    10     7     2
#>  9:     9     7    10     7     2
#> 10:    10     8    10     4     2

In its current form, dt_fill() is faster than tidyr::fill() and uses slightly less memory. Below are the results of filling in the NAs within each id on a 19 MB data set.

x = 1:1e6
dt3 <- data.table(
  x = x,
  y = shift(x, 10L),
  z = shift(x, -10L),
  a = sample(c(rep(NA, 10), x), 10),
  id = sample(1:3, 10, replace = TRUE))
df3 <- data.frame(dt3)

marks3 <-
  bench::mark(
    tidyr::fill(dplyr::group_by(df3, id), x, y),
    tidyfast::dt_fill(dt3, x, y, id = list(id)),
    check = FALSE,
    iterations = 50
  )

#> # A tibble: 2 × 3
#>   expression                                    median mem_alloc
#>   <bch:expr>                                  <bch:tm> <bch:byt>
#> 1 tidyr::fill(dplyr::group_by(df3, id), x, y)   15.4ms    46.4MB
#> 2 tidyfast::dt_fill(dt3, x, y, id = list(id))   12.4ms    17.6MB

Separate

The dt_separate() function is still under heavy development. Its behavior is similar to tidyr::separate() but is lacking some functionality currently. For example, into needs to be supplied the maximum number of possible columns to separate.

dt_separate(data.table(col = "A.B.C"), col, into = c("A", "B"))
#> Error in `[.data.table`(dt, , eval(split_it)) : 
#>   Supplied 2 columns to be assigned 3 items. Please see NEWS for v1.12.2.

For current functionality, consider the following example.

dt_to_split <- data.table(
  x = paste(letters, LETTERS, sep = ".")
)

dt_separate(dt_to_split, x, into = c("lower", "upper"))

#>     lower  upper
#>    <char> <char>
#> 1:      a      A
#> 2:      b      B
#> 3:      c      C
#> 4:      d      D
#> 5:      e      E
#> 6:      f      F

Testing with a 4 MB data set with one variable that has columns of “A.B” repeatedly, shows that dt_separate() is fast and far more memory efficient compared to tidyr::separate().

#> # A tibble: 3 × 3
#>   expression            median mem_alloc
#>   <chr>               <bch:tm> <bch:byt>
#> 1 separate               2.79s    3.89GB
#> 2 dt_separate          47.31ms   26.73MB
#> 3 dt_separate-mutable  46.85ms   26.72MB

Count and Uncount

The dt_count() function does essentially what dplyr::count() does. Notably, this, unlike the majority of other dt_ functions, wraps a very simple statement in data.table. That is, data.table makes getting counts very simple and concise. Nonetheless, dt_count() fits the general API of tidyfast. To some degree, dt_uncount() is also a fairly simple wrapper, although the approach may not be as straightforward as that for dt_count().

The following examples show how count and uncount can work. We’ll use the dt data table from the nesting examples.

counted <- dt_count(dt, grp)
counted
#> Key: <grp>
#>      grp     N
#>    <int> <int>
#> 1:     1 19638
#> 2:     2 19987
#> 3:     3 20033
#> 4:     4 20269
#> 5:     5 20073

uncounted <- dt_uncount(counted, N)
uncounted[]
#> Key: <grp>
#>           grp
#>         <int>
#>      1:     1
#>      2:     1
#>      3:     1
#>      4:     1
#>      5:     1
#>     ---      
#>  99996:     5
#>  99997:     5
#>  99998:     5
#>  99999:     5
#> 100000:     5

These are also quick (not that the tidyverse functions were at all slow here).

dt5 <- copy(dt)
df5 <- data.frame(dt5)

marks5 <-
  bench::mark(
    counted_tbl <- dplyr::count(df5, grp),
    counted_dt <- tidyfast::dt_count(dt5, grp),
    tidyr::uncount(counted_tbl, n),
    tidyfast::dt_uncount(counted_dt, N),
    check = FALSE,
    iterations = 25
  )

Notes

Please note that the tidyfast project is released with a Contributor Code of Conduct. By contributing to this project, you agree to abide by its terms.

We want to thank our wonderful contributors:

markfairbanks for PR #6 providing initial the pivoting functions. Note the tidytable package that compliments some of tidyfasts functionality.

Complementary Packages:

Name		Name	Last commit message	Last commit date
Latest commit History 137 Commits
.dev		.dev
.github		.github
R		R
docs		docs
inst		inst
man		man
src		src
tests		tests
.Rbuildignore		.Rbuildignore
.gitattributes		.gitattributes
.gitignore		.gitignore
.lintr.R		.lintr.R
DESCRIPTION		DESCRIPTION
NAMESPACE		NAMESPACE
NEWS.md		NEWS.md
README.Rmd		README.Rmd
README.md		README.md
_pkgdown.yml		_pkgdown.yml
codecov.yml		codecov.yml
cran-comments.md		cran-comments.md
tidyfast.Rproj		tidyfast.Rproj

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Repository files navigation

`tidyfast v0.4.0`

General API

Installation

Examples

Nesting and Unnesting

Pivoting

If Else

Fill

Separate

Count and Uncount

Notes

About

Uh oh!

Releases 1

Packages

Uh oh!

Contributors 6

Uh oh!

Languages

TysonStanley/tidyfast

Folders and files

Latest commit

History

Repository files navigation

tidyfast v0.4.0

General API

Installation

Examples

Nesting and Unnesting

Pivoting

If Else

Fill

Separate

Count and Uncount

Notes

About

Resources

Code of conduct

Uh oh!

Stars

Watchers

Forks

Releases 1

Packages 0

Uh oh!

Contributors 6

Uh oh!

Languages

`tidyfast v0.4.0`

Packages