GS450h Inverter voltage and motor temperature fix

[maciek16c]

Motor temperature measurement requires resistors change to 1.2k and 2.2k at sensor input

[Tom-evnut]

Why do the resistors need to change?

It is not good to require a hardware change with a software change.

[maciek16c]

Here is thermistor R–T curve:

When it's pulled to 5v through 1.8k resistor ADC voltage will never drop below 3.3V. It would require at least pull down resistor, but since any change is required i used values found in temp_sensors.ods