Infix v25.08.1

Changes

• N/A

Fixes

• Fix #1150: show-legacy wrapper permissions
• Fix #1155: show ospf commands regression
• Fix #1169: Expected OSPF neighbors not shown in sysrepocfg when the system has at least one non-OSPF interface

Infix v25.08.1-rc1

Changes

• N/A

Fixes

• Fix #1150: show-legacy wrapper permissions
• Fix #1155: show ospf commands regression
• Fix #1169: Expected OSPF neighbors not shown in sysrepocfg when the system has at least one non-OSPF interface

Infix v25.09.0

Changes

• Upgrade Buildroot to 2025.02.6 (LTS)
• Upgrade Linux kernel to 6.12.49 (LTS)
• Upgrade libyang to 3.13.5
• Upgrade sysrepo to 3.7.11
• Upgrade netopeer2 (NETCONF) to 2.4.5
• Upgrade rousette (RESTCONF) to v2
• Add support for Banana Pi R3, a 7 port switch with 2 WiFi chip
• Add neofetch system information tool for system introspection, issue #1143
• Add mtr and iperf3 network diagnostic tools, issue #1144
• Improve default bash settings with better history handling and tab completion
• cli: new terminal reset and terminal resize convenience commands

Fixes

• Fix #1080: Error message in log from rauc, deprecated 'Install' D-Bus method
• Fix #1100: Reduce DHCP client logging verbosity by 70% and include interface
  names in log messages for easier troubleshooting
• Fix #1119: CLI UX regression, restore proper behavior for no enabled command
• Fix #1155: show ospf commands regression
• Fix #1150: show-legacy wrapper permissions
• Fix #1161: error in log during boot about unsupported command
• Fix #1169: Expected neighbors not shown in sysrepocfg
• Fixes for unicode translation in log and pager outputs as well as syslogd

Infix v25.09.0-rc1

Changes

• Upgrade Buildroot to 2025.02.6 (LTS)
• Upgrade Linux kernel to 6.12.49 (LTS)
• Upgrade libyang to 3.13.5
• Upgrade sysrepo to 3.7.11
• Upgrade netopeer2 (NETCONF) to 2.4.5
• Upgrade rousette (RESTCONF) to v2
• Add support for Banana Pi R3, a 7 port switch with 2 WiFi chip
• Add neofetch system information tool for system introspection, issue #1143
• Add mtr and iperf3 network diagnostic tools, issue #1144
• Improve default bash settings with better history handling and tab completion
• cli: new terminal reset and terminal resize convenience commands

Fixes

• Fix #1080: Error message in log from rauc, deprecated 'Install' D-Bus method
• Fix #1100: Reduce DHCP client logging verbosity by 70% and include interface names in log messages for easier troubleshooting
• Fix #1119: CLI UX regression, restore proper behavior for no enabled command
• Fix #1155: show ospf commands regression
• Fix #1150: show-legacy wrapper permissions
• Fix #1161: error in log during boot about unsupported command
• Fix #1169: Expected neighbors not shown in sysrepocfg
• Fixes for unicode translation in log and pager outputs as well as syslogd

Infix v25.08.0

Changes

• Upgrade Buildroot to 2025.02.5 (LTS)
• Upgrade Linux kernel to 6.12.44 (LTS)
• Raspberry Pi 4 is now a part of the aarch64 image.
• Add support for Raspberry Pi touch display on Raspberry Pi 4

Fixes

• Fix #1098: Prune dangling container images to reclaim disk space
• Fix #1123: Disabling or removing a container may cause podman to hang
• Fix #1124: Container setup with unreachable remote image spawns
  excessive ip monitor processes
• Fix #1127: Silence libyang Obsolete schema node warnings in log

Infix v25.08.0-rc2

Changes

• Upgrade Buildroot to 2025.02.5 (LTS)
• Upgrade Linux kernel to 6.12.44 (LTS)
• Raspberry Pi 4 is now a part of the aarch64 image.
• Add support for Raspberry Pi touch display on Raspberry Pi 4

Fixes

• Fix #1098: Prune dangling container images to reclaim disk space
• Fix #1123: Disabling or removing a container may cause podman to hang
• Fix #1124: Container setup with unreachable remote image spawns
  excessive ip monitor processes
• Fix #1127: Silence libyang Obsolete schema node warnings in log

Infix v25.08.0-rc1

Changes

• Upgrade Buildroot to 2025.02.5 (LTS)
• Upgrade Linux kernel to 6.12.44 (LTS)
• Raspberry Pi 4 is now a part of the aarch64 image.
• Add support for Raspberry Pi touch display on Raspberry Pi 4

Fixes

• Fix #1098: Prune dangling container images to reclaim disk space
• Fix #1123: Disabling or removing a container may cause podman to hang
• Fix #1124: Container setup with unreachable remote image spawns
  excessive ip monitor processes
• Fix #1127: Silence libyang Obsolete schema node warnings in log

Latest build of bootloaders

This is the latest/nightly/daily build of Infix bootloaders, not the latest release.
Releases are always versioned, e.g., rpi4-boot-2025.01-1.tar.gz

Note

The latest-boot tag is set somewhere in history and has no connection to the
artifacts here. It is just a placeholder to create a fixed reference for distributing
bootloaders suitable for loading Infix. So please ignore the auto-generated links
to "Source code" downloads, below.

Infix v25.06.0

Changes

• Upgrade Buildroot to 2025.02.4 (LTS)
• Upgrade Linux kernel to 6.12.35 (LTS)
• Upgrade curiOS built-in containers to v25.06.0
• Add support for setting mode of a container content mount, issue #1070
• Add Wi-Fi client support and add support for some USB-Wi-Fi cards
• New slogan: Infix OS — Immutable.Friendly.Secure

Fixes

• cli: fix by-word movement, detect word barrier using non-alphanum chars
• cli: fix delete word left/right, make sure to save word in kill buffer

Infix v25.06.0-rc1

Changes

• Upgrade Buildroot to 2025.02.4 (LTS)
• Upgrade Linux kernel to 6.12.35 (LTS)
• Upgrade curiOS built-in containers to v25.06.0
• Add support for setting mode of a container content mount, issue #1070
• Add Wi-Fi client support and add support for some USB-Wi-Fi cards
• New slogan: Infix OS — Immutable.Friendly.Secure

Fixes

• cli: fix by-word movement, detect word barrier using non-alphanum chars
• cli: fix delete word left/right, make sure to save word in kill buffer