Using Kayak

Building

• Set PKGURL to be the source of the OmniOS bits we wish to install with kayak, in case it's not the default "omnios" publisher for whatever release branch you have checked out.

• zfs create rpool/kayak_image

• gmake [PREBUILT_ILLUMOS=<path>] BUILDSEND=rpool/kayak_image <target>

BUILDSEND must be specified.

PREBUILT_ILLUMOS should point to an already-built illumos-omnios of the version you wish to construct an installer. It is optional, but the build will warn you if you do not specify it. The build uses svccfg-native if possible to manipulate SMF on target images without conversing with the host machine's SMF services.

<target> must be specified.

install-web: Builds the <VERSION>.zfs.xz file, which is what Kayak uses for any install it does. Independent target.

install-tftp: Builds the miniroot.gz file, which is what PXE Kayak feeds to Loader to boot itself on a PXE boot. Independent target.

install-iso: Builds both install-{web,tftp} and then proceeds to construct <VERSION>.iso using components from both.

install-usb: Builds install-iso, and then proceed to construct <VERSION>.usb-dd based on the ISO image.

Operation

DHCP server:

• your server should be set to PXE boot
• the DHCP server must return and IP, a nextserver and a bootfile
• the boot file should be the file /boot/pxeboot from an existing OmniOS system

TFTP server:

• place loader.conf.local in /tftpboot/boot
• /boot/pxeboot should be placed in /tftpboot/
• /platform/i86pc/kernel/amd64/unix should be placed in /tftpboot/omnios/kayak/
• the miniroot.gz file should be placed in /tftpboot/omnios/kayak/

HTTP server:

• The system install images should be placed an accessible URL
• The target system kayak config should be placed at a URL path with the filename <macaddr_just_hex_caps>